Schedule a FREE home water test with a Culligan Water expert today!

Why Gloversville Homeowners Choose Culligan For Well Water Treatment

Our systems are second to none. The real advantage is that we make treating well water simple.

  1. We Treat Your Water, Not A Category

    Fulton County has the widest spread of well water we see anywhere in our territory, because the Adirondack boundary runs right through it a few miles north of Gloversville. South of that line, wells draw from shale and limestone and come back hard. North of it, in Bleecker and Caroga and Stratford, wells draw from ancient granite and gneiss and come back soft, low in minerals, and hard on copper plumbing. Same county, opposite problems, opposite systems. We start with a test and build the treatment around your actual numbers, which is why we won’t quote a system over the phone.

  2. The Company That Drilled It Can Treat It

    Most homeowners end up with a driller, a plumber, and a separate water treatment company, and when something goes wrong each one points at the others. We drill, pump, test, and treat. One number, one company, one answer.

  3. Expert Installation, And We Maintain It

    Culligan has been in water treatment for more than 85 years and it’s all we do. Your local Culligan delivers, installs, and maintains the system for you, so there’s no shipping damage, no unboxing, no guessing about install location, and no third-party service line when it needs attention. Schedule an appointment, then enjoy the water.

  4. Make Your Water Work For You

    On the fence about whether you need treatment? These are the returns that pay a system off over time.

    • 24% in energy savings by using softened cool water to wash clothes
    • 30% more life out of water-using appliances when contaminants are filtered out
    • 50% reduction in detergent costs for laundry, hair, and body in soft water
    • No more replacing fixtures and appliances that iron ruined early

Local Resources

Gloversville Well Water

That’s iron, and in Fulton County it is the single most common well complaint we get. It shows up in both halves of the county. In the crystalline rock north of Gloversville iron often arrives as a fine colloid that tints the water yellow-brown before it ever stains anything, and in the shale belt under the city it arrives dissolved and stains on contact with air. USGS sampled a bedrock well in the Town of Stratford that came back at nearly six times the iron standard. A softener alone won’t handle that. An iron filter will.

Hydrogen sulfide gas. It is normally associated with black shale, but it turns up in the crystalline rock north of here too, where graphitic schist supplies the organic carbon that sulfate-reducing bacteria need. The USGS well in Stratford had it. It is worse in hot water because heat drives the gas out of solution, and it will follow you to every faucet in the house. Sulfur filtration removes it.

It depends entirely on which side of the Adirondack line your well is, and this is the one place in our territory where guessing will genuinely cost you money. USGS sampled two wells in Fulton County that tell the whole story: one in Adirondack granite in the Town of Stratford came back at 23 mg/L, about 1.3 grains per gallon, which is soft. One in limestone in the Town of Johnstown came back at 225 mg/L, about 13 grains, which is very hard. Gloversville itself sits south of the boundary on glacial cover over shale, so wells in and immediately around the city usually behave like the Johnstown well. The city’s own water is soft, because it comes from six reservoirs in the hills north of town, but that tells you nothing about your well. Hardness cannot be guessed here. You have to test for it.

Culligan of the Mohawk Valley serves Fulton, Herkimer, Montgomery, Oneida, Otsego, and Schoharie Counties, including Utica, Herkimer, Fonda, Amsterdam, Gloversville, Oneonta, Cooperstown, Cobleskill, Schoharie, St. Johnsville, Little Falls, Ilion, Mohawk, Frankfort, Canajoharie, Fort Plain, Richfield Springs, Milford, and surrounding communities throughout New York’s Mohawk Valley. If your property is outside these areas, call us anyway. We may still travel there to provide water treatment service.

TREATMENT OPTIONS

Three Problems, Three Fixes For Your
Fulton County Well

Iron & Sulfur Filtration

Stops the rust staining and the yellow-brown tint, and clears the rotten egg smell out of your hot water.

Water Softening

For the hard wells south of the Adirondack line, removes the calcium and magnesium that scale your heater and spot your dishes.

Drinking Water Systems

Reverse osmosis at the kitchen sink for the water you drink, cook with, and give the kids.

The Proof

Why Do Gloversville Homeowners TRUST Our
Well Water Treatment Systems?

“Culligan has been a game changer for our home’s water”

My hair has never been softer, and I've noticed my skin is healthier. Thank you Culligan!

– Lexi M., Gloversville
Star Star Star Star Star
“They made scheduling an appointment easier than ever!”

Working with Culligan has been nothing short of excellent. Very trusted, reliable, and they know what they are talking about when it comes to water treatment.

– Sara G., Gloversville
Star Star Star Star Star
“We love having cleaner, better tasting water!”

Our tap water has never tasted better. We feel better about drinking directly from the tap thanks to our under-sink reverse osmosis system!

– Zach P., Gloversville
Star Star Star Star Star

Rust Stains? Yellow Water?

Find Out What's Really
In Gloversville Well Water!

• Fast on-site results, no mailing
• We test hardness, alkalinity, iron, sulfur, and pH
• Flexible sample pickup options

Schedule My Test Today!

Frequently Asked Well Water Treatment Questions

We Have Answers

A softener removes hardness and carries a limited amount of iron with it. In Fulton County iron is very often the main event rather than a side issue, and a lot of the iron in the crystalline-rock wells north of town is colloidal, which a softener won't touch at all. A dedicated iron filter is the right tool. A test tells us which situation you're in.

Quite possibly, just not a softener. The soft wells north of Gloversville are soft because the granite and gneiss up there give up almost nothing. That also means almost no alkalinity, which is what buffers water and keeps it from being aggressive toward copper pipe and lead solder. The USGS well in Stratford measured alkalinity of 12 mg/L, which is essentially none. That water wants neutralizing and filtering, not softening.

No. A properly functioning water softener will never make your water taste salty. The small amount of sodium added is far too little to create a salty taste.

Through ion exchange. As it removes the calcium and magnesium that make water hard, it replaces those ions one for one with sodium. The amount added is proportional to how hard your water is, and in most cases it isn't a significant contributor to the sodium in your diet.

Yes. Once a softener is installed it begins removing the scale that hard water built up. It takes a long time to clear, but it will clear.

Other than salt or potassium chloride, no. A softener actually reduces the cleaning supplies and detergents going down your drain, which makes it a net positive environmentally.

Modern softeners recharge based on how much water you use and how hard it is. Most of our customers add salt once or twice a year.

Not in the way people usually mean. The crystalline-rock wells USGS sampled in Fulton County measured pH 7.2 and 7.3, which is neutral. The problem isn't acidity, it's that the water has almost no buffering capacity, so small changes push it around and it behaves aggressively toward plumbing. That's why the City of Gloversville doses soda ash and a corrosion inhibitor into its own reservoir water. Same idea applies on a well, and the fix is a neutralizing filter rather than a pH adjustment chemical.

Iron, sulfur, and hardness are mostly aesthetic and nuisance problems at the levels we usually find. Radon in water is worth knowing about on a bedrock well here, and bacteria and nitrate are a separate test that New York recommends annually on any private well. Start with a water test and we'll tell you honestly which category your results fall into.

Most residential systems install in a few hours in a single visit. We deliver the equipment, install it, and set it up, so there's nothing for you to unbox or assemble.

As soon as the well is drilled and tested. Roughing in space and plumbing for treatment during construction costs far less than retrofitting it into a finished home.

Every recommendation we make starts with knowing what is in your water. The test is free, it happens at your house, and it takes about half an hour. You'll get your numbers explained in plain language and an honest answer about whether you need treatment at all.